Posts Tagged ‘save fuel’
How to Cut Your Winter Fuel Bills
There are three ways you can cut your fuel bills. Firstly you can insulate your home so that heat loss is reduced to a minimum. Secondly you can use energy efficient domestic appliances such as fridges and freezers, dishwashers, washing machines and energy saving lighting. The third way is perhaps the most important. Make your heating system more efficient. If your Central Heating Boiler is inefficient then the combustion level is low producing less heat. Inefficient combustion leads to higher harmful emission mainly in the form of uncombusted particulates.
The obvious solution is to replace with a more efficient Central Heating Boiler. This could cost you thousands. There is a simpler, do it yourself, inexpensive way.
Attach the correct magnet to the fuel feed pipe of your boiler and the combustion instantly becomes cleaner, your house becomes warmer and your water becomes hotter for the same setting.
The magnet conditions the gas or oil before combustion allowing it to mix better with oxygen in air. This produces more heat for the same amount of fuel. Since the burn is cleaner, the emission level will drop significantly.
Inefficient boilers have soot build up due to poor combustion. When a magnet is used, soot deposits stop immediately and the combustion chamber will be gradually de-coked. This means that your boiler will last longer and need less servicing.
Magnets have been used since the 1940s as an energy saving device. The US Air Force used magnetic fields successfully to improve the performance of their Mustang Aircraft. The magnetic field produced greater range and better performance from poor quality fuels. It was so successful, the Royal Air Force used it on their Spitfire and Hurricane Aircrafts.
The device, however, was very heavy and cumbersome because to achieve the high magnetic fields they had to use electromagnets. Today with the development of super magnets such as neodymium, more powerful magnetic fields can be generated from magnets the size of a matchbox.
Magnets work on any combustion chamber that uses oil or gas. It is very effective when attached to cars especially on older carburettor cars where the MPG is low. In 1992, The Warren Springs Laboratories, the UK Government DTI’s own vehicle testing department, were commissioned to carry out extensive trials on the benefits of magnetic fuel conditioning technology and were very surprised by the results. Their 16-page in-depth report confirmed increased power, improved fuel economy and a reduction in harmful emissions. When the magnets were removed, the benefits were reversed.
The right magnet cost only a few pounds. A new Central Heating Boiler cost a lot more. A neodymium magnet keeps its magnetic properties for 100 years. It needs no maintenance and if you move house, simply remove and attach to the pipe leading to the Central Heating Boiler of your new home.
At present the amount of carbon dioxide released into the atmosphere is still unacceptable. The best choice for home owners is re-useable energy but the installation cost is high and it takes at least ten years to recover investment. Most home owners cannot afford the conversion. They continue to use oil or gas. It is therefore very important that they make the best use of it and that is by achieving as near to 100% combustion of gas and oil fossil fuel. Attaching a magnet will help achieve this.
Copyright 2006 Dr Phil Hariram
Dr. Phil has used magnets on his heating system and his monthly standing order has been cut by more than half. Read more at http://www.philhariram.com
Article Source: http://EzineArticles.com/?expert=Dr_Phil_Hariram
http://EzineArticles.com/?How-to-Cut-Your-Winter-Fuel-Bills&id=274805
Magnets4Energy Review
Magnets4Energy Review – Magnet Generator Plans
Do You want to create free power and energy for lifetime, Magnets4Energy Guide is not the usual guide that you might already encountered online. This is not a simple guide that will teach you how to build an perpetual magnetic generator motor.
magnets4energy plans
This guide will provide you a detailed step by step instructions and at the end you will build your own magnet power generator motor for just 60 dollars. You might be a little skeptical about this, but don’t because here You will find some good reasons to trust and grab this guide!
You could watch full video regarding how to build your own magnetic energy generator on the official site or Youtube but for some reasons Youtube are canceling lot of accounts related to free magnetic power because this is a HUGE thing in the “energy sources” market and lot of very BIG companies will not profit on this if we are building our magnetic motors at our own home now!
New Way To Create And Enjoy Free Electricity.
Probably you are already aware that you can create free electricity using the power of magnet or zero point energy. This Magnetic Energy Based Motor turn the so called renewable energy obsolete. This system is definitely the new way to create and enjoy free electricity. So the question is: why does not so many people still can have this type of motor or generator? Well, the real truth is, many people believed that they can have permanent magnet power generator by spending 2000 – 4000$.
This is the price of a commercially built magnet generator that has been sold to the marketplace. Because of the huge amount involved in building this kind of generator , “normal” people didn’t have the opportunity to enjoy free energy (electricity) using this type of energy source.
Magnets4Energy guide will give you a great opportunity you should not miss. This blueprint will give you instructions (step by step) on how to build your own perpetual magnet power generator. Using this guide you will not have to spend 1000 + dollars for electricity, you will have opportunity to be a great help for the conservation of our environment and at the same time you will save money.
This is what You get in Magnets4Energy Plans:
- complete list of material and tools required
- easy to read instruction(step by step)
- tips for converting Permanent Magnet Generator for High Energy Input
- with complete and detailed diagram and schematic
- maintenance and instruction for long term use
- connecting and testing instruction
Using Magnets4Energy guide, you can build your own “personalized” magnet generator for significant savings!
So what is the conclusion in this Magnet4energy review? This is the most complete and detailed guide on how to build your own magnetic power generator. This guide will teach you everything you need to know to convert your own house into a green home even with extremely limited budget. I trusted and chose this guide because it comes form the man who spent a great part of his life working for power plants and electricity companies. I can say that he really helped so many people from saving a lot of energy and money with this guide!
Visit Magnets4Energy Official Site
—–
——–
Three Ways to Save Fuel and Energy With Magnets
The theory behind using a powerful magnetic field to improve fuel burn in combustion engines is nothing new. Magnetic fields were use to improve the combustion of fuel as early as 1940s. The US air force used magnets on their Mustang aircraft and produced greater range and performance from poor quality fuel. In 1952, Felix Bloch and Edward Mills Purcell were jointly awarded a Nobel Prize for their work on magnetic fields on solid, liquid and gas substances.
There are three ways magnets save energy and fuel.
Attach a magnet to the fuel lead pipe of your burner. The magnet conditions the fuel allowing greater combustion. This happens immediately. You produce more heat for the same amount of fuel and harmful emission is cut. I have Calorgas (Liquid Petroleum Gas) central heating. Since attaching a magnet, my direct debit has been cut by 110%. If your boiler is old and inefficient, instead of buying a new boiler, try a magnet first.
In addition the cleaner burn means that the boiler will need less servicing and lasts longer. If your boiler is already efficient, then the benefit will be less. You cannot create energy during a chemical reaction. Magnets, however, allow as close to 100% combustion. Instead of buying an expensive new boiler, attach a magnet.
Attach a magnet to the fuel feed of your car and your save fuel, energy and reduce emission. The magnet improves combustion. This produces better miles per gallon, more power and a smoother running engine.
In 1992, The Warren Springs Laboratories, the UK Government DTI’s own vehicle testing department, were commissioned to carry out extensive trials on the benefits of magnetic fuel on motor vehicles and were very surprised by the results. Their 16-page in-depth report confirmed increased power, improved fuel economy and a reduction in harmful emissions.
If your car is old with poor emission levels, the magnet will slowly clean the engine. So initially the emission will be higher than expected but eventually the level will drop significantly. A friend of mine tows a caravan with his Peugeot 2L HDi Partner Quicksilver. Since attaching a magnet his mpg has jumped up a further 10 mpg. Normally you would expect about 10% improvement.
Magnets stop and reduce lime scale. Lime scale forms because the solubility of calcium carbonate decreases with increased temperature. As calcium carbonate separates out, lime scale is formed.
Lime scale affects heat transfer. A layer of calcium carbonate 25mm. thick can decrease heat transfer by 95% and a 0.5mm layer of silica causes a decrease of 90%. In addition if lime scale collects on the heating element in your hot water tank, the element will not last long. Lime scale causes problems in washing machines.
If a magnet is attached at an angle perpendicular to the flow of water, it stops the lime scale deposits and breaks down the deposited lime scale. No one knows exactly why this happens but the magnet keeps calcium and magnesium in solution and stops them separating out and producing lime scale. It also lowers surface tension and stabilises pH. The magnetised water will protect your washing machine but will not stop lime scales in your kettle. This is because the magnetic effect is neutralised when the kettle is boiled.
So there you have it. With fuel prices going upwards at regular intervals, attach a magnet to your boiler, your water system and your car and save energy, save fuel, save money, reduce emission and prolong the life of your boiler and car.
With global warming a major current issue, it is up to all of us to do our bit. In Germany, if your boiler emission level is too high, your pay a fine. One day it will come to Britain and USA. If you have emission problem, a magnet will quickly solve it. The right magnet will keep its magnetic properties for 100 years and you take it with you when you move home or change cars. It needs no maintenance. You just simply forget about it.
Copyright 2006 Dr Phil Hariram
Dr. Phil Hariram continues to save energy with a magnet attached to his boiler, water system and car. He also has a magnetic wristband which controls his backache and enables him to not take painkillers.
Visit his website and learn the benefits of magnets. http://www.philhariram.com
Article Source: http://EzineArticles.com/?expert=Dr_Phil_Hariram
http://EzineArticles.com/?Three-Ways-to-Save-Fuel-and-Energy-With-Magnets&id=255952